Cara Mereset Printer Canon MP 145

Cara Mereset Printer Canon MP 145
  1. Tekan Power On/Off)
  2. Masukan Power, Power Tetap di Tekan)
  3. Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi (tekan tombol tanpa jeda)
  4. tekan tombol + untuk merubah 0 ke 1
  5. Printer will be print 1 page (tekan tombol power lagi –> tombol start sampai ngeprint 1 halalaman
  6. buka tutup printer
  7. cabut kabel power
  8. lepaskan catridge 40 dan 41
  9. pasang kabel power
  10. tekan tombol power
  11. buka tutup scaner
  12. masukan catridge 40 dan 41
Kalo belum berhasil coba ganti tangki tinta nya.
kalo display printer nunjukkin Error 16 (E16)
Silahkan ikuti petunjuk Mereset Waste Ink Counter (error E16) :
  1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF
  2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x
  3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE
  4. Printer akan charging
  5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset)
  6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye
  7. Matikan printer dan cabut kabel POWER
  8. Hidupkan kembali printer.
The number of the Reset :
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)
Error Code/Kode Error :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 – Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error – USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

1 komentar:

Anonim mengatakan...

thanks' setelah ane praktekin eh ternyata langsung bisa. ga perlu ke bengkel akhirnya
heheheh....

Posting Komentar